Description
Product Name : DS3800HLNE1B1B GE Central control module
Product details:
The GE DS3800HLNE1B1B is a specialized printed circuit board (PCB) manufactured by General Electric as part of their legacy industrial control systems—most notably associated with the Mark IV or Mark V Speedtronic turbine control systems. These systems are renowned for their high reliability in regulating heavy-duty gas and steam turbines.
Below is a detailed overview of the DS3800HLNE1B1B, including its specifications, advantages, precautions, and typical applications.
1. Product Description
The DS3800HLNE1B1B functions as a dedicated board within the GE Speedtronic control framework. It is designed to interface with other card racks, processors, and feedback sensors to monitor turbine conditions and execute control algorithms.
The alphanumeric part number reveals details about its revision history:
- DS3800: Identifies the basic product series (legacy GE Speedtronic board).
- HLNE: Denotes the specific functional model/circuit layout (often associated with line excitation, network interfacing, or specific signal loop processing).
- 1B1B: Represents the specific hardware revision group and artwork changes implemented by GE to optimize performance and resolve bugs from earlier iterations.
2. Technical Specifications
| Parameter | Specification |
| Manufacturer | General Electric (GE) |
| Series | Speedtronic Mark IV / Mark V |
| Part Number | DS3800HLNE1B1B |
| Device Type | Turbine Control Printed Circuit Board (PCB) |
| Operating Voltage | Standard cabinet levels (typically +5V, ±15V DC depending on system bus) |
| Onboard Components | Microprocessors, EPROM sockets, diagnostic LEDs, resistors, capacitors, and test points |
| Connectors | Multi-pin ribbon connectors for backplane interfacing |
| Dimensions | Standard GE Speedtronic board slot-in form factor |
3. Key Advantages
- Turbine-Grade Reliability: Built to survive harsh industrial environments characterized by high vibration, electromagnetic interference (EMI), and elevated temperatures.
- Fault-Tolerant Design: Integrates seamlessly into TMR (Triple Modular Redundant) architectures, ensuring that a single card failure does not cause a total turbine trip.
- Diagnostic Capabilities: Features onboard test points and LED indicators that allow field engineers to quickly troubleshoot signal flow and hardware status without removing the board.
- Hot-Swappable Adaptability: Designed for clean integration into existing GE cabinet racks, minimizing downtime during maintenance or replacements.
4. Important Precautions (Usage & Handling)
⚠️ CRITICAL SAFETY WARNINGS
- Electrostatic Discharge (ESD): This board contains sensitive CMOS components. Always wear a grounded ESD wrist strap and use static-shielding bags when handling or transporting the board.
- Power Down First: Do not insert or remove this card while the control cabinet is powered on, unless the specific system documentation explicitly states it supports hot-swapping for that slot. Doing so can cause electrical arcing or damage adjacent cards.
- Firmware/EPROM Alignment: Ensure any EPROMs or configurable chips transferred from an old board to the new DS3800HLNE1B1B match the exact software revision required by your system.
- Calibration: Some analog circuits on this board may require calibration using the onboard potentiometers after installation to align with system-specific sensor baselines.
5. Typical Applications
The DS3800HLNE1B1B is primarily utilized in heavy industrial power generation and mechanical drive systems, including:
- Gas Turbine Control: Used in GE Frame 5, 6, 7, and 9 gas turbines to regulate fuel flow, speed, and exhaust temperatures.
- Steam Turbine Control: Regulates steam valve positioning, speed governors, and extraction controls.
- Power Plants & Utilities: Deployed in baseload and peaking thermal power generation facilities.
- Oil & Gas Petrochemical Plants: Found in control cabinets for large compressor drives and co-generation units.
Advantages: Foxboro, OVATION, TRICONEX, Allen-Bradley, ABB, Motorola, Siemens Moore, Ge Fanuc, Woodward, Bently Nevada and other major import brands!
We have the same series of models in stock. If you don’t find the model you need, please contact us and we will provide you with an official quotation！
Colour：new Warranty: 12 months
Lead Time：3-day working day Country of origin: United States
Price: Please contact us Product weight：0.515kg
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
The following are other related models. If you can’t find the product you need, please contact us. Thank you
| GE | IC3607D11 |
| GE | IC3607D109A |
| GE | IC3607D107A |
| GE | IC3607D105A |
| GE | IC3606YSQC1 |
| GE | IC3607D104A |
| GE | IC3606YSQB1 |
| GE | IC3606YSQA2A |
| GE | IC3606YSMA1 |
| GE | IC3606YMID1 |
JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.
This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link:https://www.justwellcenter.com/
All other brand or product names mentioned in this document may be trademarks or registered trademarks of their respective holders.
